VSA  Inc VSA Inc. | 800-888-2140 | Lincoln, NE | Fax: 402-325-8033 | sales@vsa1.com
  • Zacuto Z-CSTG

Zacuto Z-CSTG

  • Brand: Zacuto
  • Product Code: Z-CSTG
  • Call For Pricing



Stinger For Canon C100-C300-C500

The Stinger for Canon C100-C300-C500 is an in-line system best used on long shooting days. It is a balanced shoulder mounted rig. It features our C300 Studio Baseplate which attaches to the camera with 3/8” 16 and ¼” 20 screws*.

This baseplate features a pair of 15mm rods that are 12” long running through the length of the baseplate. You can quickly reposition the rods for various lens lengths by loosening the 2 levers, one on each side of the baseplate. On each side of the baseplate there is a set of 15mm lightweight holes. The side holes take 15mm female rods that are locked via an Allen screw. You can add an arm, a rod or an EVF Mount. Or you could add two short female/female rods and mount a Zwiss Plate with professional batteries off of the side when shooting on a tripod for better balance. The baseplate has standard ¼” 20 and 3/8” 16 holes on the bottom for mounting the rig onto a tripod.

The Stinger includes our Shoulder Pad with 7” rods and Z-Lite 7 lb counterbalance weight for a fully balanced in-line rig. (Want to attach batteries at the back instead? Check out our Stinger Plus.) You can slide the counterbalance weight forward and backward on the rods for custom comfort.

This rig can be used on your left or right shoulder. With the shoulder pad and counterbalance weight coming directly off of the back of the baseplate, the rig is perfectly in-line and ready to be used with one of our EVFs for traditional ENG style shooting. You can mount your EVF to the side of the rig using our EVF Standard Mount Kit. You can also use the flip out screen on the Canon EOS C300 camera when it is mounted on top of the handle and tipped down.

This rig is compatible with any 15mm accessories. The Z-Focus would be a great add on accessory if you are looking for a follow focus.

* NOTE: The screw hole pattern on the C300 Studio Baseplate is ¼” 20, 3/8” 16, 3/8” 16, 3/8” 16. To mount the C300 camera, you will use the 1/4” 20 and the first 3/8” 16 screw hole. The C300 Studio Baseplate will ship with one ¼” 20 screw and one 3/8” 16 screw. If you are mounting an Epic or Scarlet camera, you will use the last two 3/8” 16 screws.